TBS Lucid H7 Combo Stack 8S 60A
The TBS Lucid 8S 60A 4-In-1 ESC is the latest in TBS product engineering. It is built for racing and freestyle applications and is developed to cater to the needs of both seasoned pilots and enthusiastic newcomers.
Featuring an 8-layer high current density board with twice the market average onboard capacitance, the ESC is built to withstand the harshest punishment of everyday FPV flying while delivering buttery-smooth flight characteristics paired with face-melting acceleration. By focusing on thermal dissipation from the ground up, the flight stack achieves excellent power-to-weight density without the need for heavy heat sinks.
A close collaboration with AM32 allowed us to squeeze the last bit of performance without breaking the bank.
Take your drone builds to the next level with the TBS Lucid H7 Stack, a powerful combination of a lightning-fast STM32H743VIH6 flight controller and a durable 8S ESC system. Designed for demanding pilots, this stack delivers unmatched control, stability, and efficiency, even in high-performance FPV racing and freestyle environments.
FC SPECIFICATIONS
- MCU: STM32H743VIH6 running at 480MHz, with 1MB RAM and 2MB Flash.
- Gyro: ICM42688 x 2 (duo gyro)
- OSD Chip: AT7456E (SPI2)
- Barometer: Infineon DPS310 connected via I2C2.
- PWM Outputs: 13 channels, including a dedicated “LED” pad.
- Blackbox (BB): Data logging equipped with a MicroSD card slot (SDIO)
- UARTs: 7 total (1, 2, 3, 4, 6, 7, 8) signal inversion ready
- I2C Buses: 2 available.
- CAN Bus: 1 available.
- Analog Inputs: 6 ADC channels (VBAT, Current, RSSI, Analog AirSpeed, Vbat2, Cur2).
- LED Indicators: 3 LEDs (Blue, Green for FC Status, Red for 3.3V Power).
- Breakout: SPI3 breakout available.
- USB Interface: Type-C connector (USB 2.0 standard).
- JST Connectors:
- 1x JST-SH1.0 8-pin (Vbat/G/Curr/Rx8/S1/S2/S3/S4)
- 1x JST-GH1.25 4-pin (5V/CAN-H/CAN-L/Ground).
- Dual Camera Input: Switchable inputs for two cameras.
- Power Control: Switch for filtered 5V/Vbat output power.
- DJI FPV OSD: Compatible via any spare UART port.
ESC SPECIFICATIONS
| ESC software: | AlkaMotors32 (AM32) |
| ESC target: | tbslu8s4in1 |
| Rated current: | 70A x 4, 60 seconds |
| Peak Current: | 85A x 4, 30 seconds |
| Propellers: | Up to 11″, over 7″ requires good airflow |
| Input: | 3-8S Lipo |
| Protocol: | Bi-directional Dshot 300/600), KISS ESC Telemetry |
| ESC Current port: | Yes |
| BEC: | No |
| Size: | 50mm*42mm |
| Mounting: | Gorilla-mount (39.5 x 16.0mm) & 30.5×30.5 mm or brackets for 20×20 mm |
| Weight: | 17.58g, 22g incl. brackets |
GORILLA MOUNT
Superior power delivery is additionally achieved by the innovative mounting brackets which avoid the complication of having to run mounting bolts through the middle of the ESC. We call this the “Gorilla” mount.
Frame developers are encouraged to integrate the gorilla mounting pattern into their new and upcoming frames. Backwards compatibility is provided through mounting brackets.
DOWNLOADS
- Gorilla mounting pattern
- Frame developer pack for Gorilla mounting pattern
- AM32 Online Configurator
- AM32 Firmware
- TBS Lucid Manual
Package Contents
- 1x TBS Lucid H7 Flight Controller.
- 1x 8S 4-in-1 ESC.
- Mounting hardware including Gorilla brackets for frame compatibility.
- Cables and connectors for installation.
