Lumenier ELITE PRO 100A V2.1 6-12S 4-in-1 AM32 ESC

Features

• • Utilizes High-Voltage, Low-Resistance MOSFETs
  • Equipped with a Cortex M4 32-bit Processor
  • Supports High Demag Compensation
  • Dshot300, Dshot600, Dshot1200
  • Supports PWM frequencies
  • Robust 16V 2A BEC circuit
  • Improved Heatsink Design
  • 12S high-voltage support
  • Dual Mounting Patterns
  • Bidirectional + Dshot
  • Robust PCB Design
  • MOSFET Design
  • AM32 Firmware

HIGH PERFORMANCE CUSTOM HEATSINK

The custom heatsink design provides improved heat dissipation making this ESC a perfect choice for high power needs found in Cinelifters, large drones, and high-performance racing drones. The heatsink effectively cools the ESC allowing for reliable operation even in challenging environments.

AM32 FIRMWARE AND LIVE TELEMETRY

The Lumenier ELITE PRO 100A V2.1 ESC is a 32-bit ESC running the latest generation AM32 firmware. The 32-bit architecture enables the ESC to run at incredible speeds, resulting in better performance, faster input signals, and lower latency than older 8-bit ESCs. This ESC also features a live telemetry connection for more advanced flight controllers, as well as a top-of-the-line current sensor.

HEAVY DUTY COPPER TRACES

One of the biggest features of this ESC is the heavy-duty copper traces (8oz) which can support extreme current. Additionally, the ESC PCB is 2mm thick and layered on a 2nd PCB of 1mm for a total of 3mm. More copper along with the included aluminum heatsink allows you to push more power to your drone.

BENEFITS OF AM32 FIRMWARE ON 32-BIT ESC

32-bit processors run faster than 8-bit, at which we can expect better performance from the new 32-bit ESCs. Faster input signals with lower latency and higher update rate would be possible, such as Dshot1200 or even faster protocols! (Read about DSHOT)

The 32-bit platform also allows more functionality and features that simply weren’t possible on 8bit ESCs, such as:

• Improved direction change in the Bidirectional mode
• Auto-timing for higher efficiency and reliability
• Configuring from FC using DShot commands
• Adjustable “Brake on Stop” force
• Programmable PWM frequency
• Voltage/Current limiting
• RGB LED control
• ESC Telemetry

Specifications

• Supports: Dshot300, Dshot600, Dshot1200, MultiShot, OneShot, and normal PPM 1-2us.
• Mounting Patterns: 30.5×30.5m / 86x66mm
• Processors: Cortex M4 32-Bit 120Hz
• 16V BEC onboard to power flight controller
• Dimensions: 98mmx72mmx15mm
• Continuous Current: 100A x4 ch
• Peak Current: 120A x4 ch
• Supports: PWM 8-48kHz
• Mosfet: 100V, 1.5mΩ
• Firmware: AM32
• Voltage: 6-12S
• Weight: 113g